Knowledge

The fluidity of 45 ferrosilicon is better, but the erosion of the taphole is serious, and its service life is shorter than that of smelting 75 ferrosilicon.

For the raw materials required to smelt one ton of 45 ferrosilicon, please refer to the following content, but the specifics shall be based on the actual situation.

How many raw materials are consumed to smelt one ton of ferrosilicon 75? Please refer to the content below.

During the smelting process, due to sticky furnace conditions, shallow click insertion and crucible calibration, the material surface has poor air permeability and ignition. For th

Elements intentionally added during the smelting process in order to improve and enhance certain properties of steel and obtain certain special properties are called alloying eleme

The reducing agent for smelting ferrosilicon is mostly metallurgical coke. Metallurgical coke is a coke formed at a coking temperature of about 1100 to 1300°C during the coking pro

Ferro silicon has deoxidizing properties in the steelmaking industry and is a key additive to ensure the production of qualified steel materials in industry.

Ferro silicon is a common alloy material. This product has good deoxidizing and reducing properties, so it is widely used in the steel industry, foundry industry and other industri

Metal silicon 2202 is an important raw material in the chemical industry and is widely used in alloy smelting and electronics industry.

Adding various metallic and non-metallic elements to steel can create a variety of different properties. Adding titanium during the steel smelting process can increase the wear res

The production methods of high carbon ferromanganese include blast furnace method and electric furnace method, and the characteristics of these two methods are introduced below res

High carbon ferromanganese suppliers briefly introduce the uses of high carbon ferromanganese。