Ferrosilicon Price 2026: FeSi 72/75 Export Price and Market Analysis

The ferrosilicon export price in 2026 depends on the grade, chemical composition, particle size, order quantity and delivery terms. The price references in this article list FeSi72 at USD 1,060–1,080/MT and FeSi75 at USD 1,100–1,140/MT FOB Tianjin. These figures are reference prices from the source material, not live quotations for new orders.

The source material also gives a broader FeSi75 export price indication of USD 1,100–1,150/MT. Because this range differs from the grade-specific FOB Tianjin table, the exact quotation basis should be verified before using either figure in a purchase comparison.

For procurement, the most useful comparison is not simply the lowest price per metric ton. The quotation must match the required silicon content, impurity limits, particle size, packing and delivery conditions. A lower-priced offer may not be equivalent if it has different chemical limits or requires additional processing.

The following table presents the grade-specific price ranges in the original source material. Both grades are quoted on an FOB Tianjin basis, which provides a more consistent starting point for comparing export offers.

How much higher was the FeSi75 reference price? Based on the midpoints of the listed ranges, FeSi75 was USD 50/MT higher than FeSi72. This is approximately 4.7% of the FeSi72 midpoint.

This calculation compares the reported ranges only. It does not establish a universal price premium for FeSi75 or prove that every FeSi75 offer will be more expensive by the same amount. Actual quotations depend on the agreed chemistry, size distribution, quantity and shipment conditions.

The reported fluctuation field in the original table did not contain a quantified price change. Without a comparable previous-period quotation, a percentage increase or decrease cannot be calculated reliably from these figures alone.

For a more detailed grade comparison, see FeSi72 vs. FeSi75: How to Choose the Right Grade.

Ferrosilicon prices are influenced by production costs, demand from steelmakers, available supply and the commercial conditions of an export order. These factors interact, so a change in one variable does not necessarily produce an immediate or proportional change in the final quotation.

Steelmaking Demand and Ferrosilicon Purchasing

Ferrosilicon is widely used in steelmaking as a deoxidizer and as a source of silicon for adjusting steel composition. Demand from steel producers is therefore one of the factors that can influence purchasing activity.

However, higher steel output does not automatically mean that ferrosilicon prices will rise. The effect depends on how much alloy steelmakers need to purchase, their existing inventory, their purchasing schedules and the availability of suitable material. A buyer evaluating a quotation should distinguish general steel-market commentary from evidence of actual changes in ferrosilicon offers.

Electricity and Raw-Material Costs

Ferrosilicon production requires high-temperature electric furnace operations. Electricity, silica-bearing raw materials and carbon reductants are important inputs, so their costs can affect production economics.

Higher production costs may support a supplier's asking price, but they do not automatically determine the export price. Existing inventory, competing offers, order size and demand can influence how much of a cost change is reflected in a quotation.

When evaluating a supplier's explanation for a price adjustment, ask whether the offer applies to available stock or new production, and confirm the quotation's validity period. These details are more useful for an actual purchasing decision than a general statement that production costs are rising.

Supply, Inventory and Production Availability

Available inventory and production schedules affect whether a supplier can meet a requested grade, particle size and shipment date. Material already in stock may have a different lead time from material that needs to be produced and screened to a specific size.

For buyers, the important question is whether the supplier can provide the required specification within the required shipment window. A low price is less useful if the material cannot meet the delivery schedule or the agreed quality requirements.

Particle Size, Chemical Composition and Packing

Two ferrosilicon offers may quote the same nominal grade but still differ in their chemical limits and physical specifications. Silicon content, aluminum limits, other impurities, particle-size distribution and allowable fines should be compared before deciding which offer is more competitive.

Particle size also affects handling and suitability for the intended production process. Screening requirements, packing arrangements and order quantity may influence the final commercial offer. Confirm these details before comparing prices rather than assuming that every FeSi72 or FeSi75 product is interchangeable.

See our guide to ferrosilicon particle-size ranges for more information about selecting a size specification.

Freight, Currency and Export Delivery Terms

FOB, CFR and CIF quotations cover different delivery arrangements. Under FOB, the seller's delivery obligation generally includes placing the goods on board the vessel at the named port, subject to the applicable Incoterms. CFR includes the cost and freight to the named destination, while CIF also includes the required insurance under the agreed term.

Consequently, an FOB Tianjin price cannot be compared directly with a CFR or CIF price without accounting for the different cost components. Freight rates, destination, shipment timing and currency movements can all affect the total purchasing cost.

For industrial buyers, the grade designation is only the starting point. A purchase specification should identify the required silicon content, impurity limits, particle size, packing and applicable standard. The exact acceptance limits must be agreed with the supplier rather than assumed from the grade name alone.

The figures and options above are the reference information provided in the original article. They are not a guarantee that every grade, size and packing combination is available from stock.

For quality verification, read our guide to how to read a FeSi75 certificate of analysis. For standards and acceptance requirements, see Ferrosilicon ISO vs. GB standards.

Steel demand, production costs, inventory and export conditions can influence ferrosilicon prices, but the reference ranges in this article are not sufficient to establish a reliable price forecast for the rest of 2026.

In particular, a forecast requires comparable prices from multiple dates and a clear understanding of the quotation basis. A single price range cannot show whether the market is trending upward, moving downward or remaining stable.

Before deciding whether to purchase immediately or wait, buyers should consider:

• Whether the supplier's quotation is valid for the planned order and shipment window.
• Whether the required grade and particle size are available from stock or require new production.
• Whether the quoted chemical composition and impurity limits meet the production specification.
• Whether the offer uses the correct trade term and destination port.
• Whether the expected cost of delayed purchasing outweighs the potential benefit of waiting for a different price.

Instead of relying on a general prediction, request a dated quotation with a stated validity period and compare equivalent offers. For the broader FeSi75 pricing topic, refer to our Ferrosilicon 75 Price 2026 guide.

A useful quotation comparison starts with equivalent product and delivery requirements. Comparing only the USD/MT figure may lead to an incorrect purchasing decision if the offers cover different specifications or delivery arrangements.

1. Confirm the Same Grade and Chemical Requirements

Identify FeSi72 or FeSi75 and confirm the minimum silicon content and impurity limits. If one offer allows higher impurity levels than another, the two offers may not meet the same production requirements.

2. Match the Particle Size and Packing

Check the size range, allowable fines and oversize, and packing format. If one product requires additional screening or repacking to suit your process, include that requirement in the commercial comparison.

3. Compare the Same Delivery Term

Compare FOB Tianjin with FOB Tianjin, or compare CFR quotations for the same destination port. If the delivery terms differ, identify the freight, insurance and other cost components before judging which offer is more competitive.

4. Verify the COA and Quotation Validity

Request a batch-specific certificate of analysis where applicable, and confirm the quotation date, validity period, shipment schedule and agreed inspection requirements. This helps distinguish an indicative market reference from an offer that can actually be used for purchasing.

For product details, see our FeSi72 product information and FeSi75 product information.

What is the ferrosilicon export price in 2026?

The reference table in this article lists FeSi72 at USD 1,060–1,080/MT and FeSi75 at USD 1,100–1,140/MT FOB Tianjin. These are reference figures from the original content, not live quotations. Contact us for an updated offer based on your order requirements.

What is the FeSi75 price per metric ton?

The grade-specific table lists FeSi75 at USD 1,100–1,140/MT FOB Tianjin. The original introduction also gives a broader indication of USD 1,100–1,150/MT. The exact basis for the difference should be verified before either range is used as a firm benchmark.

Why is FeSi75 more expensive than FeSi72?

The listed price midpoints are USD 1,120/MT for FeSi75 and USD 1,070/MT for FeSi72, a difference of USD 50/MT. The actual difference depends on chemical composition, impurity limits, particle size, packing, order quantity and delivery terms.

What factors affect ferrosilicon export prices?

Important factors include steelmaking demand, electricity and raw-material costs, production availability, inventory, particle-size requirements, freight, currency movements and the agreed delivery term. Their effects vary with market and order conditions.

What is the difference between FOB Tianjin and CIF ferrosilicon prices?

FOB Tianjin and CIF quotations cover different cost and delivery arrangements. CIF includes the cost of the goods, freight and the required insurance to the named destination under the agreed Incoterms. Compare offers using the same delivery basis and destination before deciding which is more competitive.

What particle size can I request for FeSi72 or FeSi75?

The original article lists 10–50 mm and customized size options. Confirm the required size range, allowable fines and oversize, and packing requirements with the supplier before ordering.

What information should I provide when requesting a ferrosilicon quotation?

Provide the required grade, silicon content, impurity limits, particle size, quantity, packing, destination port, trade term and shipment window. If you require a specific standard, COA or third-party inspection, include those requirements in your inquiry.