10-50mm Alloy 45% Ferro Silicon Granule

FeSi45 Ferro Silicon 10–50mm is an iron-silicon alloy used for cost-controlled alloy addition, furnace feeding and metallurgical blending. With Si 45% min, it is suitable when your production needs moderate silicon input instead of higher silicon grades such as FeSi65, FeSi72 or FeSi75.

You may choose FeSi45 ferro silicon when your process needs ferro silicon addition but does not require strong silicon correction or final deoxidation. Compared with higher silicon grades, FeSi45 provides lower Si input and higher iron balance, so your team should match it with your real production formula, silicon target and cost plan before ordering.

We supply FeSi45 ferro silicon in 10–50mm, 10–100mm and custom sizes. Before shipment, we help you confirm Si content, Al, Ca, C, P, S, lump size, fines condition, packing method, COA, MSDS and export documents. If your plant has a fixed internal standard for FeSi45, you can send us your chemical limits and size requirement before quotation.

10-50mm Alloy 45% Ferrosilicon Granules For Sale

Request a Quote

In one metallurgical material order we supported, the customer first asked for a higher ferro silicon grade because they were used to buying FeSi72. After checking their application, we found that this batch did not need high silicon input. Their process only required moderate silicon addition for metallurgical blending.

If they used FeSi72, the material could still work, but it was not the most economical choice for that production batch. We helped them compare FeSi45 with their required Si target and impurity limits. The customer also needed 10–50mm lump size because their workshop used manual weighing and furnace feeding.

Before shipment, we checked Si, Al, Ca, C, P and S values by COA, confirmed the lump size and provided packing photos. The customer could review the batch condition before loading.

This case shows why FeSi45 should be matched with your actual production need. It is not always necessary to choose a higher silicon grade when your formula only needs moderate Si input.

10-50mm Alloy 45% Ferrosilicon Granules Suppliers

Q: What is FeSi45 ferro silicon used for?
A: FeSi45 ferro silicon is used for moderate silicon addition, cost-controlled alloy addition, metallurgical blending and furnace feeding when your process does not need high Si input.

Q: What is the silicon content of FeSi45?
A: FeSi45 usually contains Si 45% min. Your team can check the actual Si, Al, Ca, C, P and S values by batch COA before shipment.

Q: Is 10–50mm FeSi45 lump or granule?
A: 10–50mm FeSi45 is more commonly used as lump material for furnace feeding. If your process needs smaller granules such as 1–3mm or 3–10mm, we can discuss custom screening.

Q: How is FeSi45 packed for export?
A: Standard export packing is usually 1MT jumbo bag. Small bags, pallet packing, custom shipping marks, COA, MSDS and loading photos can be arranged according to your order.

Hot Tags: 10-50mm alloy 45% ferro silicon granule, China 10-50mm alloy 45% ferro silicon granule manufacturers, suppliers, factory, Ferro Silicon Nitride, Ferro Silicon Alloy, Ferro Silicon 70, Ferro Silicon 72, ferro silicon Granules, Ferro Silicon Briquettes