News

Adding nitrogen to some microalloyed steels can give full play to the role of microalloying elements, save the amount of microalloying elements, and reduce production costs. The...

Silicon nitride is a compound of nitrogen and silicon that was discovered more than a hundred years ago. It was synthesized in Germany and only began to be used in the 1950s. As...

Silicon manganese alloy is an alloy composed of multiple elements. Silicon-manganese nitride is widely used in industry and has a relatively large output. It is a commonly used ...

Ferrosilicon nitride is a new type of magnetic material with the advantages of high magnetic permeability and low hysteresis loss. It is made from silicon nitride and iron powde...

Ferro vanadium is an iron alloy that is obtained by reducing vanadium pentoxide with carbon in an electric furnace. It can also be obtained by reducing vanadium pentoxide by the...

The equipment used in the oxygen blowing method of low carbon ferrochromium in oxygen blowing is a converter, so it is also called the converter method.

High-carbon ferrochrome is uneven, and internal problems cannot be found by just looking at it, so sampling and testing must be carried out to ensure quality.

The main components of ferrochrome slag are chromium trioxide, silicon oxide, magnesium oxide, aluminum oxide, calcium oxide and iron oxide.

There are many links that cannot be ignored during the smelting of ferrochromium, and there are also fixed smelting modes.

There are many ways to smelt low carbon ferrochrome. Do you know about the electrosilicothermal method?

Ferrosilicon is made by smelting in an electric furnace using coke, steel scraps (iron oxide scale), and quartz (or silica) as raw materials. It is an important auxiliary materi...

Based on research on alloy solidification theory and production experience, the following principles should be considered when determining the pouring position