Ferrosilicon Quotation News (Unit: USD/ton | Term: FOB Tianjin Port)

When comparing a ferrosilicon quotation FOB Tianjin, the first step is to check the grade, quoted price range and delivery terms. In this price update, FeSi72 is quoted at USD 1,020–1,040/MT, while FeSi75 is quoted at USD 1,090–1,120/MT. The price-change field is not specified for either grade.

These quotations provide a reference for export negotiations and procurement planning. The price difference between FeSi72 and FeSi75 is not the only factor to consider: the actual silicon content, impurity limits, particle size, order quantity and shipment requirements all affect the suitability and overall cost of a purchase.

Quotation basis: FOB Tianjin Port, China
Currency and unit: USD per metric ton (USD/MT)
Grades covered: Ferrosilicon 72 and Ferrosilicon 75

Price note: The midpoints are calculated from the supplied quotation ranges. They are comparison references, not confirmed transaction prices. Because the price-change field is marked "--", no increase or decrease can be established from these figures alone.

Using the midpoints of the supplied quotations, FeSi75 costs USD 75/MT more than FeSi72. This represents a price premium of approximately 7.28% over the FeSi72 midpoint.

For a hypothetical 20 MT purchase, the midpoint-based FOB budget would be USD 20,600 for FeSi72 and USD 22,100 for FeSi75. The USD 1,500 difference is based solely on the supplied quotation midpoints; it excludes costs outside the FOB terms.

Does the Higher Grade Always Offer Better Value?

Not necessarily. FeSi75 contains a higher nominal proportion of silicon, but a higher purchase price does not automatically mean a lower cost per effective unit of silicon.

For a simple theoretical comparison, divide each quotation midpoint by its nominal silicon fraction:

• FeSi72: USD 1,030 ÷ 0.72 ≈ USD 1,430.56 per metric ton of nominal contained silicon.
• FeSi75: USD 1,105 ÷ 0.75 ≈ USD 1,473.33 per metric ton of nominal contained silicon.

Under these simplified assumptions, FeSi75 has a theoretical contained-silicon cost approximately 2.99% higher than FeSi72. This is not a measurement of actual process efficiency: the calculation assumes nominal grade contents and excludes actual COA results, silicon recovery, impurity limits and process losses.

To make a purchasing decision, compare the chemical specifications and the amount of material your process actually requires. The correct choice depends on your target chemistry, recovery performance and production requirements, not simply on which grade has the higher silicon content.

Read our guide to FeSi75 vs. FeSi72: Choosing the Right Grade for a more detailed comparison.

FeSi72 for Routine Deoxidation and Alloying

FeSi72 is widely used as a deoxidizer and silicon addition in steelmaking. It can be a suitable choice when the required chemical specification is compatible with this grade and the purchasing priority is to balance material cost with consistent supply.

Before confirming an order, specify the silicon content, critical impurity limits, particle size and packing. A lower quotation is useful only when the product also meets your technical and delivery requirements.

View our Ferrosilicon 72 product specifications for more information.

FeSi75 for Higher Silicon Requirements

FeSi75 provides a higher nominal silicon content per metric ton. Depending on the target composition and process conditions, this may reduce the quantity of alloy required to achieve a specified silicon addition.

However, FeSi75 does not automatically guarantee lower impurity levels or better recovery. Confirm the actual chemical composition, particle size and agreed acceptance criteria before comparing it with FeSi72.

See our Ferrosilicon 75 product page for product information.

FOB Tianjin Port identifies the agreed loading port and delivery basis. Under the agreed FOB contract, the seller is responsible for the applicable export formalities and delivery of the goods on board the vessel at the named port. The buyer generally arranges the main ocean freight and any insurance they require.

When comparing quotations, check whether the prices use the same delivery term and named port. A lower FOB quotation cannot be compared directly with a CIF destination-port quotation without accounting for the different costs covered.

For a quotation that matches your requirements, provide the following information when contacting us:

• Grade: FeSi72 or FeSi75.
• Chemical specification: Required silicon content and critical impurity limits.
• Size: For example, 10–50 mm, 10–100 mm or another agreed range.
• Quantity: Required metric tons and whether repeat shipments are expected.
• Packing: Big bags or another agreed packaging configuration.
• Shipment: Expected loading window and destination port.
• Inspection: COA requirements and any agreed third-party inspection.

With these details, you can compare the final offers on an equivalent specification and delivery basis rather than relying on a general price range.

What is the quoted FOB Tianjin price for FeSi72?

The supplied quotation range is USD 1,020–1,040/MT, with a calculated midpoint of USD 1,030/MT. Confirm the current executable price before placing an order.

What is the quoted FOB Tianjin price for FeSi75?

The supplied quotation range is USD 1,090–1,120/MT, with a calculated midpoint of USD 1,105/MT. This is a reference range, not a guaranteed current offer.

Why is FeSi75 more expensive than FeSi72 in this quotation?

The quoted FeSi75 midpoint is USD 75/MT higher. The grades have different nominal silicon contents, but the actual value comparison also depends on chemical specifications, silicon recovery, particle size and process requirements.

Does FOB Tianjin include ocean freight?

No. Under an FOB contract, the seller delivers the goods on board the vessel at the named port. The buyer generally arranges the main ocean freight and any required insurance.

Does a price-change field marked "--" mean the market is stable?

Not necessarily. It means the supplied record does not specify a price change. A reliable assessment of movement requires comparable quotations from different reporting periods.

What information is needed for a ferrosilicon quotation?

Specify the grade, chemical composition, particle size, quantity, packing, shipment schedule and destination port. Also state any COA or third-party inspection requirements.