1. Remove the oxidized slag (or remove 40%-80%). After the slag becomes thin, add a small amount of carbon powder. Add the silicon carbide deoxidizer once or in batches. The slag will turn white in about 5 minutes. Stir thoroughly and analyze thoroughly. Continuously add a small amount of silicon carbide deoxidizer to the toner cartridge to maintain a reducing atmosphere.
2. Pay attention to adjusting the fluidity of the slag at any time during work. During the entire reduction period, add 0.05-0.1% silicon and increase carbon 0.01-0.05% (high carbon type 0.03-0.05%).
3. Low-temperature reduction should be avoided during the reduction period, and the temperature should be raised in the later period. If the temperature is low, slag pushing should be strengthened.
4. Silicon carbide deoxidizer can be packaged in double-layer packaging of polypropylene woven bags and polyethylene film bags, divided into two types of packaging: 25KG and 50KG.
