10–100mm Ferrovanadium 40 for Steel Alloying

Ferrovanadium 40 for Steel Alloying is a vanadium-iron alloy with about 40% vanadium content. It is used in steelmaking when your process needs to add vanadium into molten steel for strength, toughness, wear resistance and grain refinement.

We supply Ferrovanadium 40 in 10–100mm metallic lumps for furnace charging and batch addition. This size is suitable for steel plants that want to avoid two common problems: oversized lumps that are hard to charge into the furnace, and excessive fines that create weighing loss, dust and unstable addition. With a more regular 10–100mm size, your operators can weigh, store and add the material more easily during daily production.

For FeV40 orders, we help you confirm the details that affect real use before shipment. We can check V content, C, Si, Al, P, S, size range, packing method and COA according to your required standard. This helps you avoid receiving ferrovanadium with unclear composition, unsuitable particle size or incomplete documents.

If your steel production requires FeV40 for a fixed vanadium addition range, we can help you match the material more carefully before loading. You can review the COA, packing photos and shipment documents first, so the material you receive is easier to inspect, easier to use and closer to your production requirement.

One of our steel customers needed  ferrovanadium 40 for structural steel production. Their main problem was not whether to use ferrovanadium, but whether the material they received could match their required V content, lump size and COA standard before entering production.

In their previous purchasing process, they had faced two common problems: some ferrovanadium lumps were too large for convenient furnace charging, and the COA details were not always confirmed clearly before shipment. This made incoming inspection slower and created extra work before the material could be used.

After checking their required vanadium range and furnace feeding method, we recommended Ferrovanadium 40 10–100mm. Before shipment, we confirmed the V content, C, Si, Al, P, S, size range, packing method and COA with them. We also provided packing photos, so they could check the material condition before loading.

After using the 10–100mm FeV40, their operators found it easier to weigh, store and charge the material into the furnace. The confirmed COA also helped their quality team complete incoming inspection more smoothly.

With this supply arrangement, you can reduce the risk of receiving ferrovanadium with unsuitable size, unclear composition or incomplete documents. Your production team can check the material earlier, use it more confidently, and manage vanadium addition with fewer interruptions.

Request a Quote

Q: What is FeV40 Ferrovanadium used for?
A: FeV40 is used for vanadium addition in steel production. It helps improve steel strength, toughness, wear resistance and grain refinement.

Q: What is the difference between FeV40 and FeV60?
A: FeV60 has higher vanadium content, while FeV40 can be used when your process needs moderate vanadium addition and better cost control. The suitable grade depends on your target vanadium level and steelmaking process.

Q: Is 10–100mm suitable for furnace charging?
A: Yes. 10–100mm is suitable for weighing, storage and furnace charging. If your feeding method requires another size, we can check available stock or discuss customized sizing.

Q: Can I check COA before shipment?
A: Yes. We can provide COA before shipment. If you have specific limits for V, C, Si, Al, P or S, please send them before order confirmation.

Q: How do you pack FeV40 Ferrovanadium?
A: Packing can be arranged in jumbo bags, drums or customized export packing according to your order requirements.

Q: What information should I send for quotation?
A: Please send your required V content, size range, order quantity, packing method, destination port and any special impurity limits.

Hot Tags: 10–100mm Ferrovanadium 40 for Steel Alloying, China 10–100mm Ferrovanadium 40 for Steel Alloying manufacturers, suppliers, factory, Tzm Alloy Rod Molybdenum, 3303 2202 1101 Silicon Metal Powder, Polished Bright Surface Tantalum Plate, LC Ferro Manganese Femn, forging temperature of titanium, Mn 78 88 Ferro Manganese