1200 Grit Silicon Carbide

1200 Grit Silicon Carbide is a fine SiC abrasive powder with a source-page median particle size of approximately 2.6-3.6 μm.

If you use 1200 grit silicon carbide in a fine grinding, lapping, polishing or other controlled abrasive process, do not purchase from the "1200 grit" name alone. You should also confirm SiC content, particle-size distribution, oversize control, impurity limits and batch consistency.

We can confirm the applicable specification against your technical requirement before quotation. Final acceptance should follow the agreed specification and batch quality documents.

1200 grit silicon carbide belongs to the FEPA microgrit range. For F1200, the reference D50 is around 3 μm. Your final acceptance should still follow the agreed particle-size test method and batch report.

With fine silicon carbide powder, a small change in particle distribution can affect how the material behaves in your downstream process.

• Surface Finish

  Finer and more controlled particles can support a finer finish when your process and workpiece are matched to the selected SiC grade.

• Cutting Consistency

  A more stable particle-size distribution helps you reduce large-particle variation that may affect grinding or lapping consistency.

• Slurry or Feed Behavior

  If you use SiC powder in a slurry or metered feed system, particle distribution can affect suspension, flow and dosing behavior.

• Batch Repeatability

  For repeat orders, use the same agreed particle-size test method so you can compare one batch with the next on the same basis.

The original page contains a wide grit-size chart from coarse SiC to very fine SiC. For this page, the important distinction is that 1200 grit belongs to the fine-powder end of the range.

If your process already uses a known grit or micron range, send us that target instead of changing grit size only because a finer grade appears available.

Fine SiC Powder

Controlled Particle Size

Batch Supply

1200 Grit SiC

Before you confirm an order, we can align the inspection items with your required product specification.

Your inspection scope can include:

• SiC content;
• median particle size;
• particle-size distribution where required;
• controlled impurities;
• appearance;
• batch identification;
• packing condition.

We can provide batch quality documentation according to the confirmed order specification. If you require SGS or BV sampling or another inspection arrangement, tell us before order confirmation.

ZHEN AN operates two production bases and an in-house testing laboratory. Our broader metallurgical material supply system supports more than 150,000 MT of annual production and sales capacity, with an inventory system covering approximately 5,000 MT of core ferroalloy and metallurgical materials.

Actual 1200 grit SiC availability is confirmed by batch. Send us your required purity, particle size and quantity so we can check the applicable material before quotation.

Fine silicon carbide powder should be packed to reduce moisture exposure, contamination and powder loss during transport.

Tell us your required:

• bag or drum type;
• net weight per package;
• inner liner requirement;
• pallet requirement;
• quantity;
• destination port.

We will confirm packing and delivery according to the available batch, quantity and shipping arrangement. A fixed website lead time should not be treated as the final delivery commitment for every order.