99.98% Magnesium Ingot
99.98% Magnesium Ingot Description
99.98% Magnesium Ingot has the symbol Mg and atomic number 12. It is a shiny gray metal having a low density, low melting point, and high chemical reactivity. Like the other alkaline earth metals (group 2 of the periodic table) it occurs naturally only in combination with other elements and it almost always has an oxidation state of +2. It reacts readily with air to form a thin passivation coating of magnesium oxide that inhibits further corrosion of the metal. The free metal burns with a brilliant-white light. The metal is obtained mainly by electrolysis of magnesium salts obtained from brine. It is less dense than aluminum and is used primarily as a component in strong and lightweight alloys that contain aluminum.
The Specification of 99.98% Mg Ingot
|
Designation |
Chemical compositions % |
|||||||||||
|
Mg≥ |
Fe≤ |
Si≤ |
Ni≤ |
Cu≤ |
Al≤ |
Mn≤ |
Ti≤ |
Pb≤ |
Sn≤ |
Zn≤ |
Other |
|
|
Mg9998 |
99.98 |
0.002 |
0.003 |
0.0005 |
0.004 |
0.004 |
0.002 |
0.001 |
0.001 |
0.004 |
0.004 |
- |
|
Cd, Hg, As, Cr6+ element, The supplier does not make routine analysis, but should monitor its content, require ω(Cd+Hg+As+Cr)≤0.03%. |
||||||||||||
|
purity |
99.8%-99.99% |
|
Unit |
15Kg+/- 0.5kg;7.5+/-0.5Kg; 300 g+/-50 g |
|
Alloy or not |
No alloy |
|
plastic bag |
Wooden box or pallet, net weight 1000kg/carton, or according to customer's requirements. |
|
package |
About 1000kg/mg pallets are covered with plastic bags or according to customer's requirements. |
Production Process of 99.98% Magnesium Ingot
- Magnesium Extraction: Typically derived from magnesium-rich minerals such as dolomite or magnesite, or through the electrolysis of magnesium chloride.
- Purification: The extracted magnesium is further refined to achieve the desired purity of 99.98%, removing impurities through processes like vacuum distillation or electrolytic refining.
- Ingot Formation: The refined magnesium is melted and cast into ingots, which are then cooled and solidified into the final product form.
FAQ
Q: Do you provide free samples?
A: Of course, we can provide free samples to customers for them to check the quality or do the chemical analyses, but please tell us the detailed requirements for us to prepare the right samples.
Q: What is your lead time?
A: It usually takes about 15- 20 days after receiving the PO.
Q: Can we visit your company?
A: Yes, for sure, you are welcome to visit ZhenAn company and our products.
Also, we can talk more about the technical details if you need to.
Q: Why choose us?
A: We have been in this line for more than 30 years, we can not only provide you with high-quality products at competitive prices, but also we can supply good technique service, which can help you solve problems.
Hot Tags: 99.98% magnesium ingot, China 99.98% magnesium ingot manufacturers, suppliers, factory, 36 60 80 Grit Silicon Carbide Powder, LC Ferro Manganese Alloy Additive, Industry Silicon 1101, Mo1 Molybdenum Support Rod, tungsten alloy sputtering target, Ferro Molybdenum 65 Min 10 50mm
Previous
99.99% Magnesium IngotYou Might Also Like
Send Inquiry