FeV60 10–50mm For High Strength Steel Alloying

FeV60 Ferro Vanadium 10–50mm is a vanadium-bearing ferro alloy used for high strength steel alloying, HSLA steel production, tool steel, pipeline steel and wear-resistant steel. With V 60% min, it provides a more concentrated vanadium source than lower-grade ferro vanadium, helping your production reach the target V level with less total alloy addition.

You may choose FeV60 when your steelmaking process needs stable vanadium input, controlled microalloying and better strength-toughness balance. In high strength steel, vanadium is usually added to support precipitation strengthening, grain refinement and improved mechanical performance. The actual result still depends on steel grade design, furnace practice, recovery rate and heat treatment route.

The 10–50mm lump size is suitable for controlled furnace feeding, ladle addition and batch alloying. Compared with wider lump ranges, 10–50mm is easier to weigh and charge when your production needs more predictable addition behavior.

We supply FeV60 ferro vanadium in 10–50mm, 10–100mm and custom sizes. Before shipment, we help confirm V content, C, Si, Al, P, S, lump size, fines condition, packing method, COA, MSDS, shipping marks and export documents. If your steel plant has special limits for P, S, Al or particle size, you can send us your internal standard before quotation.

Request a Quote

High Strength Steel Alloying

FeV60 is suitable when your production needs stable vanadium addition for high strength steel. Vanadium can support precipitation strengthening and grain refinement, helping the steel reach better strength and toughness balance. FeV60 is often checked when the steel plant wants higher V input with less total alloy addition than lower-grade ferro vanadium.

HSLA Steel Production

For HSLA steel, vanadium is used as a microalloying element. FeV60 can help your team control vanadium input more efficiently, especially when the steel grade requires stable mechanical performance and controlled chemistry. Batch COA review is important because C, Si, Al, P and S should match your internal steel standard.

Pipeline Steel and Pressure-Resistant Steel

In pipeline steel production, vanadium addition is connected with strength, toughness, weldability and microstructure control. FeV60 can be considered when your process needs efficient V addition and lower total alloy weight. For high-pressure pipeline steel, your team should also check P and S limits, expected vanadium recovery and actual addition method.

Tool Steel and Wear-Resistant Steel

FeV60 can also be used in tool steel and wear-resistant steel where vanadium contributes to hardness, strength and wear performance. In these applications, the plant should confirm target V content, carbon balance, impurity limits and heat treatment route before selecting the ferro vanadium grade.

Controlled Furnace or Ladle Addition

The 10–50mm lump size is suitable for controlled furnace feeding or ladle addition. Compared with wider lump ranges, 10–50mm material is easier to weigh and charge. If your production uses bulk furnace addition, 10–100mm can also be discussed according to your feeding system.

ZHEN AN INTERNATIONAL CO., LIMITED  has more than 30 years of experience in metallurgical material supply, serving steelmaking, foundry, alloy production and refractory industries. We have our own factory and long-term supply chain coordination experience, which helps us support stable ferro alloy supply for industrial customers.

For FeV60 ferro vanadium, we focus on the details that matter in real steelmaking use: vanadium content, C/Si/Al/P/S control, lump size, batch COA, packing condition and export delivery. FeV60 is often used when high strength steel, HSLA steel, pipeline steel or tool steel production needs stable vanadium addition and controlled alloy composition.

Our factory reaches more than 150,000 tons in annual production and sales volume. We have cooperated with customers in over 100 countries and regions, including steel plants, foundries, alloy producers and industrial material distributors.

What makes us different is not only product supply, but factory-side quality control and export coordination. From material preparation to inspection documents and container loading, we help customers reduce procurement risk and receive ferro vanadium material that matches their actual steelmaking route.

Q: What is FeV60 ferro vanadium used for?
A: FeV60 ferro vanadium is used for high strength steel alloying, HSLA steel, pipeline steel, tool steel and wear-resistant steel when stable vanadium addition is required.

Q: What is the vanadium content of FeV60?
A: FeV60 usually contains V 60% min. Actual V, C, Si, Al, P and S values should be confirmed by batch COA before shipment.

Q: Why choose 10–50mm FeV60 lump size?
A: 10–50mm lump is easier for controlled furnace or ladle addition. It helps reduce oversized material problems and supports more stable weighing and charging.

Q: What should be checked before ordering FeV60?
A: You should check V content, C/Si/Al/P/S limits, lump size, fines condition, COA, packing method, order quantity and destination port.

Q: How is FeV60 ferro vanadium packed for export?
A: Standard export packing is usually 1MT jumbo bag. Small bags, pallet packing, custom shipping marks, COA, MSDS and loading photos can be arranged according to order requirements.

Hot Tags: fev60 10–50mm for high strength steel alloying, China fev60 10–50mm for high strength steel alloying manufacturers, suppliers, factory