Low Silicon Low Aluminum Ferrosilicon Block

Low Silicon Low Aluminum Ferrosilicon Block
Low Silicon Low Aluminum Ferrosilicon Block
Low Silicon Low Aluminum Ferrosilicon Block

Low Silicon Low Aluminum Ferrosilicon Block

content：72、75 size：10-60mm

Send Inquiry

Product Introduction

Products Description

Low silicon low aluminum ferrosilicon block is an indispensable material for steelmaking and casting. It is mainly used as a deoxidizer and alloying agent. The ferrosilicon block with low silicon and low aluminum is a new type of ferrosilicon product. Compared with traditional ferrosilicon products, it has many advantages, such as less slag, low dust, and low gas emission.

One of the biggest advantages of low silicon and low aluminum ferrosilicon block is that it has fewer impurities. The low content of silicon and aluminum makes the block have high purity and less slag after dissolution. It means that the production efficiency and quality of steelmaking and casting can be further improved. In addition, the block's excellent performance in reducing nitrogen and improving weldability also makes it more favored in the industry.

Another advantage of the low silicon and low aluminum ferrosilicon block is that it has low dust and low gas emission. The traditional ferrosilicon block will generate a large amount of dust and gas during transportation and use. The dust and gas not only cause pollution to the environment but also harm the physical health of operators. However, the low silicon and low aluminum ferrosilicon block has a low content of fine particles and is less likely to generate gas during use. It greatly reduces the harm to the environment and personnel health.

Moreover, the low silicon and low aluminum ferrosilicon block also has outstanding fluidity and uniformity. Its high fluidity and uniformity greatly reduce the generation of metallosis and other quality defects in the final product. The block also has good chemical stability and thermal shock resistance. It ensures that the ferrosilicon block can be used smoothly in a high-temperature environment without cracking or deformation.

The low silicon and low aluminum ferrosilicon block is a sustainable product. Its production process uses resources to the greatest extent a

nd reduces waste generation. Compared with traditional ferrosilicon products, it has lower energy consumption and lower carbon emissions. The block's outstanding performance in reducing environmental pollution and improving resource utilization efficiency meets the current trend of sustainable development in the industry.

In conclusion, the low silicon and low aluminum ferrosilicon block is a new type of ferrosilicon product with many advantages. It has fewer impurities, lower dust, and gas emission, outstanding uniformity, and fluidity, good chemical stability and thermal shock resistance. It is a sustainable product that meets the requirements of the current trend of sustainable development. Its application in the steelmaking and casting industry has greatly improved the quality and efficiency of production.

ZhenAn 130

ZhenAn 21

Products Content

Ferro silicon code	Chemical composition(%)
	Si	Mn	Cr	C	P	S
FeSi75A	74.0-80.0	≤0.4	≤0.3	≤0.1	≤0.035	≤0.02
FeSi75B	72.0-80.0	≤0.4	≤0.3	≤0.1	≤0.04	≤0.02
FeSi75C	70.0-80.0	≤0.5	≤0.5	≤0.2	≤0.04	≤0.02
FeSi65	65.0-72.0	≤0.6	≤0.5	≤0.2	≤0.04	≤0.02