Low Carbon Ferrochrome Cr60 10–50mm for Stainless Steel

Low Carbon Ferrochrome Cr60 is a ferroalloy with about 60% chromium and controlled carbon content. In stainless steel, chromium helps improve corrosion resistance, oxidation resistance and high-temperature performance, while carbon must be controlled carefully to keep the final steel chemistry within your required range.
We supply Low Carbon Ferrochrome Cr60 in 10–50mm size for furnace charging and batch addition. This size is convenient for weighing, storage and daily furnace feeding. Compared with oversized lumps, 10–50mm material is easier to add into the furnace; compared with fine material, it creates less dust and is easier to handle during production. This helps your operators control alloy addition more smoothly and keep your melting process more stable.

Before shipment, we can help you confirm Cr content, carbon level, Si, P, S, size range, packing method and COA data according to your order requirements. With our Low Carbon Ferrochrome Cr60, you can reduce specification risk, improve carbon control and make your stainless steel production planning more reliable.

Ferrochrome 60 Low Carbon Size 10-50mm For Sale

In stainless steel production, you need chromium to improve corrosion resistance, oxidation resistance and high-temperature performance. At the same time, carbon must be controlled carefully. If the carbon level rises too much during melting, your final steel grade may move outside the required chemistry range, and you may need extra adjustment before the heat can meet the standard.

One of our stainless steel customers had this problem when using ferrochrome with unstable carbon levels. Their furnace operators could add enough chromium, but the carbon value sometimes became harder to control, especially when producing stainless steel grades with stricter carbon requirements. This created extra work during composition adjustment and made production planning less predictable.

After checking their required Cr and C limits, we recommended Low Carbon Ferrochrome Cr60 10–50mm with confirmed COA before shipment. The 10–50mm size was suitable for their furnace charging method, and the controlled carbon level helped them add chromium without bringing too much extra carbon into the melt.

After switching to the matched low carbon ferrochrome grade, their alloy addition became easier to control, and they could check Cr and C values more clearly before production. This helped reduce the risk of off-spec chemistry, saved time on repeated adjustment, and made stainless steel production more stable from batch to batch.

Request a Quote

After receiving your requirements, we can check available stock, COA information, packing options and delivery terms. If your order requires a specific carbon limit, please confirm it before quotation so we can match the right material for your production.

Q: What is Low Carbon Ferrochrome Cr60 used for?
A: It is mainly used in stainless steel, heat-resistant steel and special steel production where you need chromium addition and controlled carbon input.

Q: Why should I choose low carbon ferrochrome instead of high carbon ferrochrome?
A: If your final steel grade has strict carbon limits, low carbon ferrochrome helps you add chromium without increasing carbon too much. This helps you control final steel chemistry more easily.

Q: What carbon level can you supply?
A: Common low carbon options include C 0.06% max or C 0.10% max, depending on stock and order requirements. Please send your required carbon limit before quotation.

Q: Is 10–50mm suitable for furnace charging?
A: Yes. 10–50mm is commonly used for furnace charging and batch addition. If your feeding method requires another size, we can check available stock or discuss customized sizing.

Q: Can I check COA before shipment?
A: Yes. We can provide COA before shipment. If you have specific limits for Cr, C, Si, P or S, please send them before order confirmation.

Q: How do you pack Low Carbon Ferrochrome Cr60?
A: Standard packing is 1 MT jumbo bag. 25kg bags, pallet packing or customized export packing can also be arranged if required.

Q: What information should I send for quotation?
A: Please send your required Cr content, carbon limit, size range, order quantity, packing method, destination port and any special impurity limits.

Hot Tags: Low Carbon Ferrochrome Cr60 10–50mm for Stainless Steel, China Low Carbon Ferrochrome Cr60 10–50mm for Stainless Steel manufacturers, suppliers, factory, Ferro Silicon 72, Pure Silica Powder 2202, silicon carbide sandblasting, Silicon Lump with 3303 1101, Metallic Silicon 3303, 78 Mc FeMn Lumps