Updated July 24, 2026
What Is the Silicon Metal Powder Price in July 2026?
Direct answer: On July 24, 2026, the China market reference for both 553# silicon metal powder and 99# silicon metal powder was CNY 9,200–9,600 per ton, with an average reference price of CNY 9,400 per ton.
The published daily change was CNY 0 per ton. This means the reference range remained unchanged on the listed date, but it does not mean that every factory offer or delivered quotation was identical.
| Grade | Market Reference (CNY/ton) | Average (CNY/ton) | Daily Change | Reference Date |
|---|---|---|---|---|
| 553# Silicon Metal Powder | 9,200–9,600 | 9,400 | 0 | July 24, 2026 |
| 99# Silicon Metal Powder | 9,200–9,600 | 9,400 | 0 | July 24, 2026 |
Market data source: Shanghai Metals Market, July 24, 2026. The figures above are dated China market references rather than our current executable offer.
The public market reference does not specify a 16–200 mesh range, packing method, delivery destination or export trade term. A delivered, FOB, CFR or CIF quotation must therefore be calculated separately according to your actual order requirements.
Need a Current Silicon Metal Powder Quote?
Send us your required grade or purity, chemical limits, mesh size, quantity, packing method and destination. We will check the available specification and prepare a quotation based on your actual order requirements.
Are 553 and Si ≥ 99% Silicon Powder the Same?
Not necessarily. 553 silicon metal powder is normally identified through a grade system related to impurity limits such as Fe, Al and Ca. A specification written only as Si ≥ 99% confirms the minimum silicon content but does not provide the complete impurity requirements.
Two products may both meet a minimum Si content while having different Fe, Al, Ca or other controlled elements. These differences may affect whether the material matches your production process.
Before quotation, we recommend confirming the full chemical specification rather than comparing the minimum silicon content alone. You can also send us an existing COA or technical requirement for comparison.
What Determines the Final Silicon Metal Powder Price?
The market reference gives you a general price level, but the final quotation depends on the complete specification and delivery basis.
| Quotation Factor | Information to Confirm |
|---|---|
| Grade and purity | 553, Si ≥ 99% or another agreed chemical specification |
| Chemical composition | Si, Fe, Al, Ca and other controlled elements |
| Particle size | 16–200 mesh, 100 mesh, 200 mesh, 325 mesh or a customized range |
| Size tolerance | Acceptable oversize, undersize and particle-size distribution |
| Order quantity | Trial order, container quantity or regular monthly requirement |
| Packing | Small bags, jumbo bags, inner lining, pallets or moisture protection |
| Delivery basis | EXW, domestic delivered, FOB, CFR, CIF or another agreed term |
| Destination | Delivery city or destination port |
| Documents | Batch COA, packing list and agreed inspection requirements |
Why Does Mesh Size Affect the Quotation?
Silicon metal powder requires additional crushing, milling and screening compared with silicon metal lumps. A finer powder or a narrower particle-size range may require more processing, repeated screening and stricter particle-size control.
The term 16–200 mesh covers a relatively wide particle-size range. Two products using this description may still contain different proportions of coarse and fine particles. When your production process is sensitive to powder distribution, the acceptable oversize, undersize and fines limits should be confirmed before order placement.
The quotation may therefore be different for 100 mesh, 200 mesh, 325 mesh or a customized particle-size distribution, even when the chemical grade is the same.
Why Are Packing and Storage Important?
Silicon metal powder has a larger surface area than lump material and requires more attention during packing, transportation and storage. Suitable sealing and inner lining help reduce exposure to moisture, contamination and material loss.
Before quotation, please confirm whether you need small bags, jumbo bags, pallets, moisture-resistant inner liners or customized shipping marks. These details affect both the packing cost and the condition of the material after transportation.
After arrival, the powder should be stored in a dry and covered area, with the packaging kept sealed until use.
How Should You Compare Two Silicon Metal Powder Quotations?
Do not compare only the price per ton. First check whether both quotations are based on the same:
- Grade, purity and complete chemical limits
- Mesh range and particle-size tolerance
- Order quantity and packing method
- Delivery destination and trade term
- COA, inspection and document requirements
- Quotation validity period and expected delivery time
A lower offer may use a broader particle-size distribution, different impurity limits, simpler packing or a different delivery basis. A comparable quotation should clearly state the material specification and what is included in the price.
Historical Delivered Price Reference from December 2025
The following table records the delivered price information published on December 26, 2025. It is retained only as a historical reference and should not be treated as the current market price.
The historical table uses a delivered 16–200 mesh basis, while the July 2026 table uses a general China market reference. Because the price bases are different, the two tables should not be used to calculate a direct increase or decrease.
| Specification | Quotation Reference (CNY/ton) | Transaction Reference (CNY/ton) | Price Basis | Date |
|---|---|---|---|---|
| 553, 16–200 Mesh | 9,700–10,400 | 9,500–10,300 | Delivered reference | December 26, 2025 |
| Si ≥ 99%, 16–200 Mesh | 9,800–10,400 | 9,600–10,300 | Delivered reference | December 26, 2025 |
FAQ About Silicon Metal Powder Prices
Q1: What was the silicon metal powder price on July 24, 2026?
A: The published China market reference for both 553# and 99# silicon metal powder was CNY 9,200–9,600 per ton, with an average of CNY 9,400 per ton.
Q2: Is the listed market price our final quotation?
A: No. It is a dated domestic market reference. Our final offer depends on the chemical specification, mesh size, quantity, packing, destination and trade term.
Q3: Is 553 powder the same as Si ≥ 99% powder?
A: Not automatically. The 553 grade normally includes limits for impurity elements, while Si ≥ 99% only confirms the minimum silicon content. The full specification should be checked before comparison.
Q4: What information should I send for a quotation?
A: Please send the required grade or purity, chemical limits, mesh size, order quantity, packing method, destination and expected delivery time.
Q5: Can you provide a batch COA?
A: Yes. Batch chemical information and agreed quality documents can be prepared according to the confirmed order requirements.
Our Silicon Metal Powder Supply
We supply silicon metal powder in different grades and particle sizes for metallurgical, refractory and industrial processing applications. Before quotation, we can help confirm the chemical composition, particle size, packing method, quantity and shipment requirements.
View our silicon metal powder specification or send your requirement to sale@zanewmetal.com for current availability and quotation support.
Send Your Silicon Metal Powder Requirement
Please include the required grade, chemical limits, mesh size, quantity, packing method and destination port. We will review the details and prepare a quotation based on your order requirements.
